Production
1 July 202610 min
Parquet installation: tech cards and geometry control
Traditional and modern methods, substrate moisture, sanding, finish and documented handover — how Cardinal Hall installs in-house parquet.
Read articleExpert articles on wood interiors
Engineering insights on parquet, installation, fitted furniture and care — from Cardinal Hall technologists.
Guides
18 June 20268 min
Parquet subfloor: survey protocol before ordering material
Screed moisture, flatness, bond strength and acclimatisation — Cardinal Hall engineer checklist before premium parquet installation.
Read article
Guides
4 June 20268 min
Single batch: one wood lot for the entire interior
Why floor, doors, stairs, kitchen and panels from one prepared lot keep a unified tone for decades — and what happens when you reorder.
Read article
Trends
22 May 20267 min
Wood interiors 2026: material, light and monolithic architecture
Matte oil and lacquer, wide format, fitted furniture in one plane, hidden hardware and single batch — what architects choose in 2026.
Read article
Production
8 May 20269 min
Kitchen and fitted furniture installation: axes, joints, handover
Datum zero, site humidity, carcass fixing, coplanar fronts and final protocol — engineered installation of premium furniture.
Read article
Guides
24 April 20269 min
Parquet for a residence: species, construction and interior compatibility
Solid, engineered or modular; grading; underfloor heating and fitted furniture compatibility — decisions after site survey, not from a catalogue.
Read article
Guides
10 April 20268 min
Solid vs engineered board: an engineer’s comparison for architects
Stability with humidity swings, refinishing depth, build-up height and selection logic for a specific substrate and microclimate.
Read articleTips
27 March 20266 min
Premium parquet care schedule after handover
40–60% humidity, compatible products for oil or lacquer, seasonal checks and professional finish renewal — Cardinal Hall service card.
Read article
History
14 March 20269 min
Artistic parquet: module geometry without error accumulation
CAD layout, ±0.5 mm production tolerance, installation on room axes and coordination with doors and skirting — from drawing to handover.
Read article
Guides
5 July 20269 min
Parquet sanding & refinishing: stages and timelines
Coating diagnosis, grit sequence, gap filling, tinting and Saicos/Osmo — protocol for private residences (not heritage OKN).
Read article
Guides
28 June 202610 min
Heritage restoration: parquet, boiserie and compliance
Cultural heritage — archives, pattern recreation, museum loads. How this differs from sanding in a private mansion.
Read article
Guides
12 June 20267 min
Hidden doors & solid portals: details and single wood batch
Concealed frames, expansion gaps, leaf height vs floor finish — same batch as your parquet.
Read article
Production
1 March 20268 min
Solid timber stairs: load calculation, joints and acoustic comfort
Flight geometry, support stiffness, load transfer to the substrate and squeak-free installation — stair project stages in a single batch with the floor.
Read articleGuides
14 July 20267 min
280-day drying: 6–8% moisture and ±0.5 mm geometry
Why a long kiln and thermobaric cycle stabilises planks, cuts gap risk and holds ±0.5 mm tolerance across the interior.
Read articleGuides
14 July 20266 min
NDA and equal service: confidentiality as manufactory standard
Why NDA is protocol on 100% of projects — and how one service level holds from a single room to a mansion.
Read articleGuides
15 July 20268 min
Floor and kitchen from one batch: one tone for decades
How to align parquet and kitchen fronts from one timber lot and one finish — without two oak shades at the kitchen↔floor joint.
Read article