Question 1

Why 280 days of wood drying instead of the standard 30-60 days?

Accepted Answer

280 days of chamber drying isn't marketing—it's a technological necessity. In the first stage, timber sawn into 'frize' strips and air-stacked in piles with spacers is conditioned in ventilated workshops. That way we reduce moisture by 25–30% from the initial value as gently as possible. The second stage takes place in a vacuum-convective chamber with thermo-humidity treatment developed by our in-house engineering team. It is essentially the same natural process, scaled to an industrial workflow. Frize strips on trolleys with spacers enter the drying chamber. Hot air is the drying medium. Wood temperature is raised to +55 °C, then vacuum is applied with internal pressure reduced to 0.8 atm. Together, these conditions bring sap to a boil for 10–15 minutes per cycle. The cycle runs 48 times per day and continues until the wood reaches 9±1% moisture.

Question 2

How do you work with clients and confidentiality?

Accepted Answer

100% of projects under NDA—this isn't optional, it's standard. We don't publish addresses, client names, or floor plan details without written permission. Photography only with client consent, often prohibited entirely. Our team signs personal non-disclosure agreements. For clients from public spheres (politics, business, culture), we can operate through structured legal entities without revealing the ultimate beneficiary. Payment possible via escrow accounts with bank guarantees from top-10 institutions.

Question 3

Is the 25-year warranty real or just marketing?

Accepted Answer

Real, but conditional. The warranty covers structural integrity when the temperature-humidity regime (18-24°C, 40-60% humidity) and operating conditions are met.

Question 4

What's the point of a comprehensive solution: floor + walls + furniture from the same wood?

Accepted Answer

First, aesthetics: unified grain pattern, tone, and transition from floor to panels, panels to kitchen facades creates a sense of cohesive space, as if the interior is 'carved' from a single block. Second, technology: using one timber batch, we guarantee identical reaction to humidity and temperature—floor and panels 'breathe' synchronously, no deformations at joints. Third, logistics: one supplier, one installation cycle, unified warranty. For clients: one call, design project with all technical nodes, one contract, one responsibility.

Question 5

Can you restore 19th-century parquet in cultural heritage sites?

Accepted Answer

Yes, it's one of our core competencies. We've worked in the Kremlin (Red Square), Vaganova Ballet Academy, dozens of estates and mansions. Process: complete documentation (photos, measurements, species analysis, identification of historical installation techniques), then dismantling damaged areas while preserving 80-90% of the original, restoring lost planks by matching timber species, grain, and grade. Finishing layer restoration with application of protective coating (lacquer or oil) to extend service life.

Installation of panels and boiserie

Principle 1: Substrate and datum "zero"

Principle 2: Moisture under control

Principle 3: Specification for the project

Principle 4: Handover with a care regime

Installation of panels and boiserie

Axial layout and module

Wall and plane preparation

Technical gaps and stability

Integration with doors, moldings and lighting

Final adjustment and handover

Discuss panel and boiserie installation

Installation FAQ